Desktop client for Windows and macOS
A controlled environmentfor every Claude account.
Two layers guard every account. The Barrier takes over all traffic and sends it through the Static Residential IP you chose; the firewall stops anything that tries to slip around it — DNS, IPv6, UDP or WebRTC leaks. Around them: environment checks, isolated browsers and cleanup.
- Traffic held until the Static Residential IP is verified
- Proxy credentials stay in your system keychain
- Reports uploaded only with your consent
What Barrier does
Everything around the account, handled in one client
Eight tools that work together: check the machine, control the traffic, isolate the browser, clean up after, and keep each account on its own Static Residential IP.
Environment checks
Compares the time zone, system and browser language, IP location, DNS and WebRTC with the Static Residential IP you are using, and lists proxy settings, competing proxy apps, IPv6 and VM or remote-desktop hints.
- One-click fixes after you review them
- Time zone and language set to match the Static Residential IP
Network diagnostics
Tests every hop of the proxy chain and each node’s latency, re-checks the chain every 10 seconds by default and swaps a failing front node without restarting.
- IP risk check (a local estimate)
- DNS cache and fake-IP flush
Leak verification
A nine-layer verdict covering takeover, route, firewall, a bypass drill, IPv4 Static Residential IP (SIP), IPv6, DNS, WebRTC and UDP, exportable as an HTML report.
- Run before and after each switch
- Shareable leak report
Traffic control and firewall
A system-level kill switch lets only Barrier’s tunnel and essentials through, holds traffic during a Start or Static Residential IP switch, and keeps a pause in place across restarts.
- Built into the operating system
- Released only when the measured egress matches
Isolated browsers
A bundled Chromium with a separate profile per account. Language and time zone follow the Static Residential IP and WebRTC is limited to proxied UDP.
- Fingerprint engine on Apple silicon
- Built-in browser check page
Trace and disk cleanup
Removes Claude and Claude Code leftovers (caches, IDE locks, editor extension state, crash reports, keychain entries) and re-checks each item afterwards. Work files and credentials are kept unless you confirm.
- Trace cleanup to a restorable quarantine
- Disk cleanup from a reviewed plan
Multi-account management
Each Claude or Claude Code account has its own country, region and linked Static Residential IPs. Switching backs up and restores the local sign-in state and picks a chain that matches the country.
- Country mismatch warns before switching
- Server copy holds metadata only
Static Residential IPs (SIP)
Use a platform Static Residential IP with a same-country backup, rent a Static Residential IP by country, or add your own SOCKS5 or HTTP egress. A launch is refused if the measured IP is not the bound Static Residential IP.
- Paste a link to fill in a Static Residential IP
- Credentials never leave your keychain
How a Start works
Nothing goes out until every stage passes
Pressing Start runs four stages in order. Traffic stays held by the firewall until the last one confirms the Static Residential IP.
- 01
Route
HeldTurns on Strict Mode and builds the chain to the account’s Static Residential IP.
- 02
Check
HeldScans the computer: time zone, language, proxy settings, competing apps, IPv6 and the account’s country.
- 03
Network
HeldTurns on the system firewall with the tunnel held, then measures the Static Residential IP, its country and network, DNS and WebRTC.
- 04
Verify
ReleasedChecks that the firewall rules are loaded and that a direct connection outside the tunnel is blocked, then releases traffic only when the measured egress is the selected Static Residential IP in a confirmed country.
If the route and its backup both fail, Barrier pauses the network and closes Claude, Claude Desktop and Antigravity after a countdown.
Leak verification
Nine layers between your account and a leak
Each layer is checked on its own and reported as pass, warning or fail. The bypass drill and firewall layers need the kill switch on macOS or Windows.
- L01Pass
Takeover
System traffic is captured by Barrier’s tunnel.
- L02Pass
Route
The default route points into the tunnel.
- L03Blocked
Firewall
The kill switch is armed and blocking.
- L04Blocked
Bypass drill
A deliberate direct connection is stopped.
- L05Pass
IPv4 Static Residential IP (SIP)
The public IPv4 is the bound Static Residential IP.
- L06Blocked
IPv6
No IPv6 path around the tunnel.
- L07Pass
DNS
Lookups resolve through the Static Residential IP’s region.
- L08Pass
WebRTC
No local or public IP exposed by WebRTC.
- L09Blocked
UDP
UDP cannot leave outside the proxy.
Platforms
Built for Windows and macOS
The same client on each system, with the differences stated plainly.
| Platforms | Windows | macOS · Apple silicon | macOS · Intel |
|---|---|---|---|
| Environment checks and fixes | Included | Included | Included |
| Kill switch | Included | Included | Included |
| Isolated browser profiles | Included | Included | Included |
| Browser fingerprint engine | Included | Included | Not included |
| Account switching with sign-in backup | Encrypted config | Keychain | Keychain |
| Trace and disk cleanup | Included | Included | Included |
On Intel Macs the browser is Ungoogled Chromium without fingerprint spoofing; the client says so in the browser page. Linux is not supported.
Accounts and plans
Start free, sign in for the full toolkit
Without an account
- Node selection and speed tests
- Strict Mode, rules and logs
- The default proxy chain and one Static Residential IP of your own
Signed in and approved
- Environment, DNS, WebRTC and time-zone checks with one-click fixes
- Leak verification and the kill switch
- Account, trace and disk cleanup
- Isolated browsers, managed accounts and platform Static Residential IPs (by plan)
- Environment reports and the barrier-env-check CLI
Signing in also requires accepting the usage agreement once.
Your data
Keeps secrets on your machine
Credentials stay local
Proxy and Static Residential IP credentials are stored in the system keychain or Credential Manager and never uploaded.
Metadata only on the server
Accounts saved to your server vault hold names, countries and Static Residential IP links, not passwords.
Reports by consent
Environment reports are saved on your computer and uploaded only when you agree.
Masked logs
Log exports mask secrets before they leave the app.
Pricing
Plans
Prices are set by the Barrier service. VIP is a solid start for everyday use; SVIP adds high-purity premium routes for long-term use.
No plans are on sale right now.
FAQ
Questions
Which systems does Barrier run on?
Windows (64-bit) and macOS on Apple silicon and Intel. Linux is not supported.
Do I need an account?
Not for the basic proxy: node selection, Strict Mode and one Static Residential IP work without signing in. Environment checks, leak verification, cleanup, isolated browsers and reports need a signed-in, approved account.
What does the kill switch block?
Everything except loopback, Barrier’s own tunnel and proxy core, DHCP, the local control API and, if you allow it, your LAN. It uses the operating system’s own firewall and stays in place across restarts until you release it.
Does the browser spoof fingerprints on every Mac?
No. Apple silicon Macs get the fingerprint engine. Intel Macs use Ungoogled Chromium with separate profiles but no fingerprint spoofing, and the client shows this on the browser page.
What does cleanup delete?
Only the items in the plan you review: Claude and Claude Code caches, IDE locks, editor extension state, crash reports, proxy leftovers and Claude-only keychain entries. Work data and credentials are kept unless you confirm them separately.
Where are my proxy passwords stored?
In your system keychain (macOS) or Credential Manager (Windows). They are not uploaded to the Barrier service.
How do I pay?
WeChat Pay, Alipay or card (via Creem). Prices are in CNY; card payments are converted at checkout.
Check the environment before the account sees it
Download the client, press Start and see every stage for yourself.